Trade Range Options

The range offers a variety of different options. You can choose from Unvented, Hit and Miss Ventilation, Rotary Ventilation, Wormgear opening for maximum ventilation and Access Hatch units should roof level access by required.

Unvented_Trade

Unvented

Fixed rooflight and kerb with no ventilation, used for areas that require natural light only.


Hit_Miss_Vent_Trade

Hit and Miss Titon Vents

Offer manually operated ventilation via a sliding mechanism mounted internally to the kerb. The vents are opened and closed as required by hand or pole. The vents can be installed on 2 or 4 sides of the kerb. Ideally used for areas that do not require a high volume of ventilation.


Rotary_Vent_Trade

Rotary Vents

Offer manually operated ventilation, with a rotating internal vent which allows the user to open and close the vents as required by hand or pole. The vents can be installed on 2 or 4 sides of the kerb. Ideally used for areas that do not require a high volume of ventilation.


Wormgear_Trade

Manual Hinge – Wormgear

A brass telescopic winding mechanism is mounted internally to a 40mm high UPVC lifting frame which is fitted with galvanised steel reinforcement bars. This mechanism allows the user to remain at ground level and operate the unit with a winding rod. Wormgear rooflights offer a higher level of ventilation and can be opened up to approximately 300mm.


Chain_Motor_Trade

Electric Hinge – Chain Motor

Utilises an electrically operated chain motor that is mounted to a 40mm high UPVC lifting frame fitted with galvanised steel reinforcement bars. The motor is available in 24V or 230V options and has the capacity to either be wired to an open/close switch or to a control panel (please note the rooflight will be supplied as standard with the motor only, controls are available at extra cost). Chain actuated rooflights offer a higher level of ventilation and can be opened to approximately 300mm.


Access_Hatch_Trade

Access Hatch

An opening hatch that utilises 2no gas rams to assist opening, mounted internally to a 40mm high UPVC lifting frame which is fitted with galvanised steel reinforcement bars. The hatch will open to between 80-90 degrees to give ease of access to roof level. the Access Hatch is available with Brighton Catch, Hasp and Staple or key operated locking mechanism.

TradeRangeRooflightFittingInstructions

Comments are closed